[Elecraft] Firmware 4.18 APF adjustment using shift control

[Guy Olinger K2AV]

Wayne has officially yanked 4.18. If SSB problems with 4.17, reload
4.14. Nothing until Lyle gets back.

4.17 alpha testers were going nuts on the APF and likely did little
checking of the TX function change, which apparently had the SSB bug
found in 4.17.  Any problems, reload 4.14.

73, Guy.

On Sat, Nov 6, 2010 at 2:53 PM, Doug Turnbull <turnbull at net1.ie> wrote:
> Richard and fellows,
>    I too have not experienced the drop in SSB output.   I am still using
> version 4.17.   There is probably more to this problem than is immediately
> obvious and for that matter I wonder if the original Alpha testers ever
> experience the difficulty in the original testing.
>
>           73 Doug EI2CN
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Richard Squire -
> HB9ANM
> Sent: 06 November 2010 18:02
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Firmware 4.18 APF adjustment using shift control
>
>
> A fellow Swiss ham and I apparently were among the lucky few not to
> experience any SSB power issue with Release 4.17/2.65. I wonder whether this
> has anything to do with some interaction with filters or other settings.
>
> But now after installing 4.18/2.67, I noticed that turning the shift to
> exactly 1 kHz will mute both receivers and only impulses from the encoder
> are heard (fairly loud!) until shift is returned CCW to below 300 Hz.
>
> Not a big issue since only slight moves around my 700 Hz sidetone are
> normally required.
> Just wanted to point out that the loss of SSB power does not seem to occur
> on every K3.
>
>
> -----
> Richard - HB9ANM
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/Firmware-4-18-APF-adjustment-using-shif
> t-control-tp5711904p5712716.html
> Sent from the [K3] mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>