[Elecraft] New K3 Beta Release: APF for CW, "Fast Monitor" & improved TX gate for voice modes

[Philippe Trottet]

Even the mic dynamics came back to normal compare to 4.17, I confirm the same difference between 4.18 and 4.14 and about the APF if moving the Shift to 1khz a big click then nothing. Need to go down to 280 HZ to restart the APF.
 
73's
Philippe A65BI


>>> "Geoffrey Downs" <geoffreywd at madasafish.com> 06-11-2010 19:02 >>>
Hi Lyle,

SSB output is certainly improved in F/W 4.18 compared with 4.17 but contrary 
to what some others are saying it seems to me still to be down compared with 
4.14. This morning I did a tx gain calibration and noted output from the amp 
under 4.14. I then installed 4.18, cycled power on and off and did another 
tx gain calibration. With all settings unchanged it was around 15%  down on 
4.14. Can anything more be done?

Credit where it is due, however, the APF feature is excellent, although I do 
not often use CW so have gone back to 4.14 for now.

73 to all

Geoff
G3UCK

----- Original Message ----- 
From: "Lyle Johnson" <kk7p at wavecable.com>
Subject: [Elecraft] New K3 Beta Release: APF for CW, "Fast Monitor" & 
improved TX gate for voice modes


K3 beta-test firmware revision 4.18 (with DSP rev. 2.67) is now
available. 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Elecraft at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html