[Elecraft] Problem with beta 4.18

[Steve Ellington]

Eric
It really does do that....Turn APF's shift up to 1 khz and see. No biggie 
but shouldn't happen.
N4LQ
Steve

----- Original Message ----- 
From: "Eric Swartz WA6HHQ - Elecraft" <eric at elecraft.com>
To: "dalej" <dalej2 at mac.com>
Cc: "Elecraft Reflector" <elecraft at mailman.qth.net>
Sent: Saturday, November 06, 2010 11:51 AM
Subject: Re: [Elecraft] Problem with beta 4.18


> Make sure you checked 'LOAD ALL' in K3Util when loading f/w into the K3. 
> You must always  include the fpf and other files when upgrading. All are 
> in the beta .zip file.
>
> 73,
> Eric
>
> www.elecraft.com
> _..._
>
>
>
> On Nov 6, 2010, at 5:01 AM, dalej <dalej2 at mac.com> wrote:
>
>> I loaded beta 4.18 again direct to the K3 bypassing P3 and same problem 
>> with crackling audio.  I now reverted back to beta 4.17 and all is fine 
>> again.
>>
>> 73
>> Dale, k9vuj
>> S/N 2268
>>
>>
>> On 06, Nov 2010, at 6:13, dalej wrote:
>>
>>> I just loaded this beta version 4.18 and now I get loud crackling from 
>>> the speaker when tuning though the APF filter, also, the audio goes 
>>> away.  I uploaded the firmware though the P3 twice, once power on P3 and 
>>> the second time power off with the same results.  I will next try 
>>> loading the firmware directly into the K3.  If I have the same result, I 
>>> will then revert back to the previous version, beta 4.17, which worked 
>>> fine including the power out.
>>>
>>> 73
>>> Dale, K9VUJ
>>> S/N 2268
>>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html