[Elecraft] Elecraft Digest, Vol 79, Issue 7 :message 12 Subject: Re: [K2] Filters attenuation

[JONES, George]

I have a similar experience - my 700 HZ & 400 Hz filter selections are maybe 3 db down on
The 2.4 Khz SSB filter setting and  the 200 Hz filter is at least a further 6db down.
I am going to redo the alignment.

73

George G4TPV

Message: 12
Date: Thu, 04 Nov 2010 13:12:46 -0500
From: dave <ho13dave at gmail.com>
Subject: Re: [Elecraft] [K2] Filters attenuation
To: ok1rp <indians at xsmail.com>

I dunno about the loss you are seeing but I've measured about 8 dB of 
loss in my K2 at 200 Hz vs 1 kHz BW. That does strike me a quite a bit 
of loss. I just don't use the narrow filters often. I know of at least 
one other K2 that has similar loss. Anyone else?


73 de dave
ab9ca/4

The information in this e-mail is confidential. The contents may not be disclosed or used by anyone other than the addressee. Access to this e-mail by anyone else is unauthorised.
If you are not the intended recipient, please notify Airbus immediately and delete this e-mail.
Airbus cannot accept any responsibility for the accuracy or completeness of this e-mail as it has been sent over public networks. If you have any concerns over the content of this message or its Accuracy or Integrity, please contact Airbus immediately.
All outgoing e-mails from Airbus are checked using regularly updated virus scanning software but you should take whatever measures you deem to be appropriate to ensure that this message and any attachments are virus free.