[Elecraft] K3 MCU 4.17 (APF beta) kills SSB output?

[Guy Olinger K2AV]

I am unable to duplicate your conditions, I am only able to get APF on
in CW mode.  Wonder if this would be something where a previously
uncontrolled memory bit is in an undetermined state, leaving a strange
"remembered" condition when those bits are used for the first time?

73, Guy.

On Thu, Nov 4, 2010 at 2:50 PM, JAMES ROGERS <w4atk at bellsouth.net> wrote:
> I went through the CONFIG menus to see what might have changed while
> in SSB. I found DUAL PB had APF on.  I was unable to turn it off while
> in SSB, so went back to CW mode turned the APF off (nor) and returned
> to SSB and all was normal. Full output.
>
> I have confirmed you can only turn APF on/off while in CW mode.
> It would then seem that APF should be turned off automatically when in
> any mode other than CW.
>
> JIM ROGERS
> jimrogers_w4atk at me.com
> http://web.me.com/jimrogers_w4atk
>
>
>
> JIM ROGERS
> w4atk at bellsouth.net
> http://web.me.com/jimrogers_w4atk
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>