[Elecraft] K3 Beta Release: APF for CW; "Fast Monitor" & improved TX gate for voice modes

[Jan Erik Holm]

Yes APF came out reel good, very well done! Don´t even know if
it was this good on the FT-1000D, at least not on the units I
did own.

Now if only AM RX was to be fixed I would be happy, as it is
right now AM (not sync AM) RX is more or less useless. It "got
broken" in the DSP code way back. I have written about this
problem before and I´m not going to repeat myself any further.

/ Jim SM2EKM
---------------------------------
On 2010-11-04 00:17, Bill [NS4C] wrote:
>
> I loaded the beta firmware so I could see what all the APF buzz was about.
> 3D2A was spotted on 18070 so I turned the beam and he was there in and out
> of my noise level. I turned on the new APF function and peaked the CW
> signal. He was now 100% copy. Turned APF off and he was in and out of my
> noise level again. Now I understand how good of a tool APF is for weak
> signal CW. BTW The 3D2A is in my log.
>
> Many thanks Elecraft,
>
> 73  Bill  NS4C
>