[Elecraft] K3 APF FINE Tuning

[Vic K2VCO]

Neither of your solutions would work with QRQ CW turned on.

On 11/3/2010 7:59 PM, Ron D'Eau Claire wrote:
> I'm not clear on the value of changing the APF center frequency
> independently of the actual signal center frequency. If the other station
> drifts off-frequency, I just tune him back in with the RIT or, since I use
> SPLIT as my basic operating mode, with the VFO knob.
>
> In what circumstances if tuning the APF frequency useful?
>
> Ron
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Wayne Burdick
> Sent: Wednesday, November 03, 2010 7:01 PM
> To: wb6rse1 at mac.com
> Cc: Elecraft Reflector
> Subject: Re: [Elecraft] K3 APF FINE Tuning
>
> Yes, you can fine-tune (1 Hz) using either the VFO or RIT.
>
> In addition, it looks like the next release may provide 5-Hz
> increments for tuning the APF center frequency (presently 10). We're
> testing that now.
>
> 73,
> Wayne
> N6KR
>
> On Nov 3, 2010, at 6:30 PM, wb6rse1 at mac.com wrote:
>
>> Elecraft continues to delight.
>>
>> FINE tuning ON can be very helpful on really really weak signals
>> with the APF.
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-- 
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/