[Elecraft] K3 / FLDIGI problem...

[Don Wilhelm]

John,

Since your software is operating at 19200 bps, have you set the K3 
CONFIG: RS232 menu parameter to 19200 as well.
If the software application is smart enough (K3 Utility is), it can 
change the K3 port data rate, but many cannot so you have to do it 
manually at the K3 end.

73,
Don W3FPR

John Ragle wrote:
> I am:
>
> Using WIN 7 Ultimate.
>
> Using Elecraft K3/100 set to "Data A" or to "USB." RS232 params set to 
> 19200 + 1 stop.
> Using E'craft USB to RS232 adapter, which loads driver and selects 
> COM13. Device manager shows COM13/19200/1 stop.
>
> Using SignaLink USB with E'craft cable to rear connections.
>
> Using either fldigi 3.12.5 or 3.20.b9...problem is the same with either.
>  
> Using RigCat with K3.xml, 19200 + 1 stop on Com 13.
>
>   
>