[Elecraft] K3 and no front microphone working

[Peter, DL2FI]

It happened several times that the connector between DSP board and
Frontplate was not set properly into the corresponding Jack. (It´s easy to
place it just a millimeter parallel to the jack. If so, the front Mike does
not work.


73 de Peter, DL2FI

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of Ron Gould
> Sent: Thursday, March 25, 2010 12:47 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 and no front microphone working
> 
> I have a K3 and MH2 as well as a Quiet Phone Plus.  The Quiet Phone
> Plus only works from the rear but not the front.  I have Heil Kenwood
> adaptor.  The MH2 does not work either.  Both cases not TX audio from
> front connector.  No Sub receiver installed.  Serial number in the
> 2700's.  I have selected FP.L for both and Bias for M2.  Neither works.
> Advice appreciated.  I did submit inquiry to Elecraft but they are now
> closed.  Did I miss something?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html