[Elecraft] KRC2 Problem

[Jack Brindle]

Barry;

Was the KRC2 working previously? Please detail the jumper settings and  
any additional information you may have about the device. We will get  
you going again.
I'll be taking further discussions off the Elecraft main list...

Jack Brindle, W6FB
Elecraft Engineering.

On Mar 24, 2010, at 2:03 PM, Barry Horning wrote:

> I have a KRC2 with the following problems:
>
> 1) Ran KRC2 Test Procedure and all F1 Hold tests work but F4 Hold  
> and Tap F1
> thru F4 produce no effect
> 2) Have resoldered everything and retried - no change
> 3) Tried updating firmware from 1.4 to 1.5 using the Utility and the
> computer now refuses to talk to the KRC2 and the KRC2 no longer  
> works (LED
> on bright all the time)
>
> Any Thoughts?
>
> Barry GM4TOE
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html