[Elecraft] K2 external auto tuner and 100 watt amp

[Don Wilhelm]

Paul,

The KAT100 is designed to be installed in the EC2 enclosure.  It has the 
plugs to connect to the KPA100 internal cables (except for the 
speaker).  The external cabling is also provided with the KPA100 and 
KAT100 kits, just make up the cable shown in the KAT100 manual.
Your base K2 will need the KIO2 to provide the path for the required 
signals.  There are alternatives to the KIO2 that can be homebrewed, but 
they do not provide a connection for the computer.  The computer 
connection capability in the KPA100 is not used if it is mounted 
external to the base K2.

73,
Don W3FPR

paulb wrote:
> Hello folks
>
> Need a bit of input here....I have a K2 with auto tuner fitted.
>
> I would like to add the 100watt amp and external tuner.
> Can these be put together in one single unit, using an Elecraft
> box ?  
>  
> Not sure how the amplifier is linked to the K2, normally it has
> a harness internally.
>
> The plan is to keep the K2 stock 10 watt for portable, and 
> plug in the external amp and tuner for use at home or contests.
>
> thanks 
>
> cheers 
> Paul
> zl1ajy
>
>
>
>
>
>   
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 9.0.791 / Virus Database: 271.1.1/2763 - Release Date: 03/22/10 03:33:00
>
>