[Elecraft] (K3) Mode change with band unpredictible

[wb5tuf at earthlink.net]

What logging software are you using? 


-----Original Message-----
>From: Terry Schieler <terry.schieler at wirelessusa.com>
>Sent: Mar 22, 2010 2:25 PM
>To: elecraft at mailman.qth.net
>Subject: [Elecraft] (K3) Mode change with band unpredictible
>
>My K3 (#474) seems to be all over the board when it comes to changing bands
>and ending up with the expected or desired mode for that frequency.  I can
>be on 14.030 CW, go to 10 meters SSB and then back to 14.030 and the mode
>will be USB or LSB there.  There seems to be no rhyme nor reason to the mode
>it ends up on.  My old FT-1000MP always went back to the last mode used in
>the sub-band.  It would always go to the right band, freq and mode when I'd
>click spots on my loggers spotting list.  I've shut off mode control on my
>logging program (N3FJP ACLog) as I thought it may be sending conflicting
>Mode commands to the rig.  No fix.  
>
> 
>
>I can't seem find a solution in my manual (v. D-2) but seem to remember
>reading here that a solid fix for "mode by frequency" or "mode by last used
>on a band" had been implemented.  If so, I obviously missed it.  Is this
>related to the missing "band stack" in the K3?  
>
> 
>
>Running 3.79 .  Can anyone help me get this set up properly once and for
>all?  Thanks.
>
> 
>
>73, Terry, W0FM
>
> 
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html