[Elecraft] [K3] AM Bandwidth

Joe Subich, W4TV lists at subich.com
Mon Mar 22 14:54:04 EDT 2010


> My main question is is it normal for the BW to max out at 5.0?

Yes.  The K3 "width" display represents the audio bandwidth. 
In AM the RF bandwidth is twice the audio bandwidth.  Note 
however, that the bandwidth display is somewhat confusing 
in that it represents the larger of 2 * (Fh-Fc) or 2 * (Fc-Fl) 
where Fc = center, Fh = Hi cut, and Fl = Low cut.  Further the 
maximum Fh (high cut) frequency is 4200 Hz in AM, LSB, USB and 
2400 Hz in CW.    

73, 

   ... Joe, W4TV 
 

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Rick Prather
> Sent: Monday, March 22, 2010 12:41 PM
> To: mzilmer at verizon.net
> Cc: Elecraft Elecraft
> Subject: Re: [Elecraft] [K3] AM Bandwidth
> 
> 
> "Nor" is 3 khz and 1.5 kHz center.  
> 
> My main question is is it normal for the BW to max out at 5.0?
> 
> Probably doesn't matter since there is no audible difference 
> as you advance wider than 3.2 anyway.
> 
> Thanks,
> 
> Rick
> K6LE
> 
> On 3/22/2010, at 9:11 , Matt Zilmer wrote:
> 
> > If you press and hold the SHIFT control (see NORM on VFO 
> A), it will 
> > reset the Fc and BW to what's normal for that mode.
> > 
> > matt W6NIA
> > K3 #24
> > 
> > On Mon, 22 Mar 2010 08:57:18 -0700, you wrote:
> > 
> >> After installing the 6.0 kHz AM filter I notice the Max DSP b/w is 
> >> 5.0 and the Shift center is 1.5 kHz.
> >> 
> >> Is this the normal set up?
> >> 
> >> TIA,
> >> 
> >> Rick
> >> K6LE
> >> # 3727 
> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft at mailman.qth.net
> >> 
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



More information about the Elecraft mailing list