[Elecraft] Remote KPA-100 Kit

[Don Wilhelm]

Gary,

You do *not* lose the computer connection when the KPA100/KAT100 are 
located in a separate enclosure.
The cable to be constructed is exactly the same as the one shown in the 
KAT100 manual.  The connector that connects to the K2 (KIO2 option) has 
2 cables coming out of it - one goes to the KPA100/KAT100 and the other 
cable goes to the computer.

The only thing that is lost is the ability to connect the computer to 
the KPA100 connector, one must connect to the computer from the KIO2.

73,
Don W3FPR

Gary G7USC wrote:
> Following on from this :)
> I have the KPA 2 to build for my K2.
> The plan is to have it set up remotely in due course with the KAT 100
> (initially the KPA will be in the K2). The ATU and remote enclosure will be
> the next step in my evolution of this lovely little radio.
> Must think of a name for mine at some point :)
> I normally have mine connected to a pc for logging etc. As I couldn't
> imagine nowadays not having this faclity and what I have read on the
> archives seems to suggest that if you remote it all that you lose this
> option.
> Is it possible to remote the KPA 100 and KAT (100 watt version) and still
> have PC control as well?
>
> 73 Gary G7USC
>   
>