[Elecraft] OT? Heil Headset

[Joe Subich, W4TV]

> If there is a lot of difference, can I change the wetup in 
> the Rig to match the element?

The HC-4 has less low end and a more peaked response.  In general, 
setting the K3 for rP.H or fP.H (high gain) and turning off the bias 
should be all you need to do for the HC-4.  If the HC-4 is lacking 
in low end for your taste, you can use the TX EQ to bring up the 
200 Hz setting by 6 dB (band 3 = +6dB).  You should not need any other 
changes (leave band 1 and band 2 turned down as the 50 Hz and 100 Hz 
spectrum adds nothing to SSB communication). 

73, 

   ... Joe, W4TV 
 

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Craig WØLV
> Sent: Sunday, March 21, 2010 9:18 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] OT? Heil Headset
> 
> 
> 
> I have an older proset with an HC-4 element.  What is the 
> difference between the one that Elecraft offers and what I have?  
> 
> If there is a lot of difference, can I change the wetup in 
> the Rig to match the element?
> 
> Craig
> WØLV
> --