[Elecraft] K144XV Doesn't work

[Matt Zilmer]

I think if you set XV1 ADR to Int trn 1, it should work a lot better.
See the manual to be sure.

73,
matt W6NIA

On Sun, 21 Mar 2010 06:02:00 -0800 (PST), you wrote:

>
>
>Installed, set in menu 
>XV1 RF  144
>XV1 IF 28
>XV1 PWR  L 1.50
>XV1 OFS  5.40
>XV1 ADR  trn 1
>
>LED flashes once when powered on
>
>Firmware sent (again) LED flashes appropriately.
>
>NO audio except FM hiss 
>
>if 'MODE is changed from FM to CW or DATA or AM - band switches to 46.940 
>(from 146.940) 
>
>if above is done from 144.390 then with CW, DATA, or CW it switches to
>44.390
>
>I thought it was supposed to XVT with 28MHZ per XV1 IF 28 ??
>
>nothing heard with a sig gen either.
>
>and of course no power out.
>
>Any suggestions please
>
>thanks John VE3NFK
>
>(the rest of the updates went fine except Synchro AM now has a NEW annoying
>habit of 'clunking' as it crosses over 739.994 - 740.004 (medium wave am
>station) which it didn't do before)