[Elecraft] General Coverage Question - K3

[Brett Howard]

Entering a direct freq is easy...

Press FREQ ENT (red button high right from the knob).  Then use the red
numbers to enter the freq (and you can abbreviate).  You can put in 14.2
or you can enter 142 and both will put you on the same freq.

~Brett

On Sat, 2010-03-20 at 19:17 -0500, Don Cunningham wrote:
> Brett,
> You are a genious, it worked and the KBPF3 lives, hi.  That was too simple, 
> I just didn't try tuning out of the ham bands!!!  I still have yet to figure 
> out how to do a lot on the rig (like entering a direct frequency), so now I 
> can finish the build with the KPA3 amp.  Thanks for your insight, Brett.
> 73,
> Don, WB5HAK 
>