[Elecraft] Appendix A page 3

[Sean Cavanaugh]

Hi Patrick,

I just finished my kit and ran into the same issue. I pretty much 
ignored the colours they specified and went with the markings on the 
component instead. Having a good magnifier helps a lot with that though. :)

Enjoy the kit. I got mine finished up last weekend and have had a number 
of great QSOs with it. I'm finding I greatly prefer it to the FT-950 for 
CW. I only use the other rig when I need a bit more power (i.e. rarely.) 
or for digi modes.

73,

--
Sean - VA5LF

On 03/19/2010 10:12 AM, Patrick Bourgeois wrote:
>
> Hello guys was doing an inventory of my K2 kit when I ran into I suppose a typo on the part list.  Page 3 of Appendix A D9 states you should have one 1N5711 Diode with Orange glass body E560004.  then D8, D11, D13, D18, D40, D41 states you should have 6 ea 1N4148 clear or blue glass body E560002.  I have found this to be wrong?  I have one blue glass body but the part number on the blue diode is 1N5711 of which I am suppose to have only one. I have 6 orange glass body diodes of which no part number can be seen on the diode.  Am I correct in assuming that the descriptions are wrong and that E56004 should say blue glass body, and E560002 should say orange?
>
>
> Revision G, May 29, 2007 Manual
>
>
> Thanks
> KE5EBS
>
> Patrick Bourgeois
>   		 	   		
> _________________________________________________________________
> Hotmail: Trusted email with powerful SPAM protection.
> http://clk.atdmt.com/GBL/go/210850553/direct/01/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html