[Elecraft] {K-3} K144XV

[Matt Moller]

It sounds like the sub can be on 2m, but only if the main is as well and they are
sharing the KXV3A input path. In that case the main and sub could be on different
2m frequencies, but must both use the antenna connected to the K144XV.
Unless something hasn't been implemented yet.

Matt Moller
KG6KSL
K3 #3496


 On Fri 19/03/10 12:25 PM, Bob Cunnings sent:
> Why does the data sheet for the K144XV state "2-meter receive on
> bothmain and sub receivers" and "With the sub receiver installed, you
> can listento a repeater’s input and output frequencies
> simultaneously."
> http://www.elecraft.com/manual/K144XV%20Data%20Sheet%20rev%204s
> m.pdf
> Bob NW8L
> 
> On Fri, Mar 19, 2010 at 12:13 PM, Phillip Buckholdt <k8mby-1 at w
> adsnet.com> wrote:> Thanks to all who replied, several said 2 meter
> recption is not possible on> the sub.
> > I thought it was, Yes on both the main and
> sub.> When I put a 2M freq in the sub, just Ant
> apperas in the display, I guess it> won't work in ths Sub
> >
> >    Thanks
> >     Phil
> >     K8MBY