[Elecraft] [K3] Assembly question

[Don Wilhelm]

Mike,

Do not leave it out.  That washer is a spacer.
Apply pressure between the board and the front panel metalwork and 
tighten the nut until the washer is firmly captive.

If you have the board plugged in correctly, nothing will be harmed.  If 
you don't have the board pluggin in correctly, it should be obvious 
because you will not be able to engage the nut on the phone jack.

73,
Don W3FPR

Mike wrote:
> Thanks, David.
>
> I'm considering just leaving it out, it seems to serve no purpose.
>
> 73, Mike NF4L
>   
>