[Elecraft] [K3] Assembly question

[Mike]

Thanks, David.

I'm considering just leaving it out, it seems to serve no purpose.

73, Mike NF4L

David Lankshear wrote:
> It was a bit loose on my K3 #1122, but I've seen it as a close fit on other K3's and a slack fit on a couple of others.
>
> Mine rattled when the internal speaker was used so I put a little bit of stuff called Blu-Tak on mine to stop it rattling. Subsequently, on  removing the DSP from the front panel to make changes, I used a tiny dot of superglue to fix it to the front panel.   After finger tightening the nut on the jack socket there's still a tiny gap but it doesn't rattle any more.
>
> 73  DaveL  G3TJP
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>