[Elecraft] Anderson power pole

[Mitch Wolfson DJØQN]

Unfortunately, APP is not widely used in Europe, and can be expensive and 
hard to find. I have always brought mine over from Dayton trips, etc.

If Chris does indeed need to replace his connector, he can e-mail me 
directly, and I will drop him a pair in the local mail.

73,
Mitch DJ0QN

----- Original Message ----- 
From: "Jim Brown" <jim at audiosystemsgroup.com>
To: <elecraft at mailman.qth.net>
Sent: Monday, March 15, 2010 7:07 PM
Subject: Re: [Elecraft] Anderson power pole


> On Mon, 15 Mar 2010 09:59:33 -0500, Radio Amateur N5GE wrote:
>
>>Is there a way of getting the piece of metal out of its socket
>
> No. You've got to replace the pole. I've successfully done it with much
> larger power poles that still had a wire attached, but with the wire 
> broken
> off, you'll never get it out. If the wire were still attached, you could
> slide a small screwdriver between the soldered contact and the retaining
> spring under it, then pull on the cable to get it out.
>
> These connectors are inexpensive, widely available, and work very well. 
> I've
> rewired my entire station to use them for power, and also used them for 
> all
> the computer equipment that uses "wall wart" supplies of various sorts.
>
> 73,
>
> Jim K9YC
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html