[Elecraft] K2 C44

[Don Wilhelm]

Geo,

You must have missed the note about C44 on page 22 of the manual - this 
capacitor is not used.

As far as your extra capacitor, did you do a full inventory before you 
started including checking the number of capacitors of each value 
against the parts list?  If you did that, you would have known for 
certain whether there was an extra (that sometimes happens - rare, but 
it happens).
If you did not do a full  inventory, I suggest you go to the parts list 
and check each location that has a .01 uF capacitor on the board.  If 
all those locations have a .01 uF capacitor installed, then you can rest 
assured that you have an extra one.  I know of no easier method.

73,
Don W3FPR

W2bpi1 at aol.com wrote:
> Ref control board caps. I have one cap left over 103. I see on  board a 
> place marked C44. But instructions say nothing about this part? What's  the 
> story?  Geo/W2BPI
>   
>