[Elecraft] K3: ACC Pin10?

[Don Wilhelm]

Martin,

ACC Pin 10 is a low power (10 ma. max) copy of the KEYOUT connector on 
the rear panel.  It is open circuit until the K3 is keyed (or PTT or 
VOX), and then it goes to a closed circuit condition.
So yes, the K3 pulls this pin to ground during transmit, and it should 
work well for keying a transverter.

73,
Don W3FPR

DM4iM wrote:
> What does this Pin exactly do? Pull to Ground or deliver a voltage?
> I need to key a Transverter (non-Elecraft).
>
> Martin
>   
>