[Elecraft] [K3] K3 USB, Serial Drivers, and HRD Connection
David Herring, K6DCH
david at k6dch.com
Tue Mar 9 22:54:51 EST 2010
There may be a way to tell you prolific drivers to be something else
other than com5...say maybe com3?
I have a similar setup but with different serial interface and hence
different drivers. I had to set the driver to be, in my case, com2 in
order for HRD to use it.
73,
Dave. K6DCH
Sent from my iPhone
On Mar 9, 2010, at 5:44 PM, Phil Hystad <k7peh at comcast.net> wrote:
> I rarely dip into my Windows laptop but I wanted to check out
> something with HRD (Ham Radio Deluxe) so I thought I would hook it
> up to my K3 (I had it configured to work with my Icom 756 Pro III
> already). So, I chose to do a new connection setup for the K3 after
> I had setup the serial interface (using the serial/USB cable from
> Elecraft). I had already run the K3 USB so I figured this should
> work with HRD.
>
> But, problems. I am wondering if HRD can use the driver setup for
> this serial interface? I first ran HRD and when I did the new
> connection I had COM3 available but nothing else. I tried with
> COM3, no good. So, I shutdown HRD and started up K3 USB utility.
> It listed COM5 (not COM3). I did the connection and port test and
> all seems to work. I shutdown the K3 USB utility. Started up HRD
> and no COM5 is available.
>
> So, it seems like HRD does not see the ports created by the driver
> installed (Prolific drivers) for the Elecraft Serial/USB interface.
>
> Before I start debugging this problem maybe there is an obvious
> answer from those who have already done this? Is there something
> that I am missing? Does anyone successfully use HRD with the
> Prolific drivers and the Elecraft supplied serial/USB cable?
>
> 73, phil, K7PEH
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list