[Elecraft] N1MM config questions

[Peter]

Steve

Just a standard RS232 cable will give you CW out on the K3
A home made cable will give you also FSK/RTTY
And to make it complete with a standard audio cable you will have it all 
(RTTY/SSB/CW)
http://www.pi4cc.nl/personal/pc2a/k3/index.htm

Peter
Steve Robinson schreef:
> My lovely bride of almost 32 years has recently insisted that I buy a 
> K3 for
> my belated birthday present, so I did (what a woman). I am starting 
> with the
> basic kit that includes the 100 watt amp and 2.8Khz and 400Hz Inrad 8 
> pole
> filters. That is it. Building the kit was a lot of fun and #3979 is 
> happily
> on the air.
>
> So far I have serial communications with N1MM Logger so I can change
> frequencies from the TNC or bandmap window. I am looking for sage advice
> with respect to keying and audio. I do have a RIGblaster plus here but 
> can I
> key the rig from the serial cable? So far I have N1MM set for the proper
> serial port talking to the K3 at 38400-N-8-1-1-DTR and RTS Always On. 
> If I
> can key it with this cable, I could toss the RIGblaster aside and try 
> some
> of the recent audio hints I have read here in the last day or so, but 
> please
> advise on this too if you can.
>
> I know I am still pretty unfamiliar with the rig but I hope to get on any
> way this weekend when I can. It¹s nice to be part of this new family. 
> Thanks
> for reading this and thanks in advance!
>