[Elecraft] RTTY questions - solved it I think

[DALE LONG]

I found a problem with  audio output from computer and am transmitting on 15m...But no QSO, so not sure if it will work.  Thanks

dale

--- On Thu, 3/4/10, DALE LONG <dale.long at prodigy.net> wrote:

From: DALE LONG <dale.long at prodigy.net>
Subject: [Elecraft] RTTY questions
To: Elecraft at mailman.qth.net
Date: Thursday, March 4, 2010, 8:05 AM

I am having trouble getting started in RTTY.  Am using AFSK and N1MM with MTTY.

In the RTTY Engine it appears that I am transmitting, but there is no output.  Last night I went through all the K3 config parameters, and still no luck.

There were a few times that I noticed an "Overload" error message...Another thing is that in the TX tab of the setup, it will not recognize my COM port.  Thats probably because it is in use. The problem may be a N1MM setup issue.  In the Configur Ports tab, what ports do I need to assign in addition to the radio?

Thanks

Dale CX/N3BNA


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html