[Elecraft] IF output buffer gain Mod

[ab2tc]

Hi,

"Via" means "by way of" as in "via airmail". In this case we route from one
side of the board to the other (or from one layer to another) via a
feedthrough as they used to be called. In this day of shortforms and
acronyms they are universally simply called via's.

AB2TC - Knut


Radio Amateur N5GE wrote:
> 
> <snip>
> Howdy Dave,
> 
> Via's are holes in the circuit board that are plated through the board
> to the other side.  Don't ask me why they are call via's ;o)
> 
> The purpose of the mod is to increase the signal output at the IF Out
> connector that you would connect a Panadapter to.  Some Panadapter
> need a little stronger signal from the K3 to enable you to see weak
> signals in the Panadapter display.
> 
> If you're not using a Panadapter you don't need to do the
> modification.
> 
> If that doesn't clear it up for you send me email off the list and
> I'll try to help you.
> 
> 73,
> 
> Tom, N5GE
> 
> <snip again>
> 

-- 
View this message in context: http://n2.nabble.com/IF-output-buffer-gain-Mod-tp4659103p4661122.html
Sent from the Elecraft mailing list archive at Nabble.com.