[Elecraft] AFSK - K3 - SignaLink USB

[Greg]

Lee

I had an issue with the signalink were somehow the mixer settings got 
changed.  I called the Signalink folks and they advised the VOL and the 
WAV settings should be set to max.

73
Greg


On 6/30/2010 7:08 PM, Lee Buller wrote:
> I went back through the installation of the SignaLink USB again.  I increased the drive from the computer to the device using the mixer panel program in Windows XP.  It was set as per the instructions, but I tweak it up a couple of notches and it seems to drive a whole not better now.  I get plenty of drive to the audio where I am running 45 on LINE IN and about t2 o'clock on the SignaLink USB.  HMMMM.
>
> Thanks for all the help guys.
>
> Lee
> k0WA
>
>
>   Ham Radio Operators:  Kansas QSO Party is August 28-29, 2010.  See www.ksqsoparty.org for details
>
> In our day and age it seems that Common Sense is in short supply.  If you don't have any Common Sense - get some Common Sense and use it.  If you can't find any Common Sense, ask for help from somebody who has some Common Sense.  Is Common Sense divine?
>
> Common Sense is the image of the Creator expressing revealed truth in my mind. -  J. Wolf
>
>
>
>
>
>
> ________________________________
> From: Lee Buller<k0wa at swbell.net>
> To: Elecraft Reflector<elecraft at mailman.qth.net>
> Sent: Wed, June 30, 2010 8:02:36 PM
> Subject: [Elecraft] AFSK - K3 - SignaLink USB
>
>
> Ladies and Gentlemen....
>
> I just got my K3 back from Aptos.  I had some issues with the unit that were repaired and all the mods were put into place.
>
> Things have changed for my AFSK setup and wonder if others are seeing this.
>
> I am now having to drive the SignaLink USB full TX to get any ALC indication on the K3.  In addition, my LINE level is now at 58 and it just goes to 60.  Now, I am driving the K3 with the SignaLink USB through the LINE IN jack in the back and of course the audio is coming out of the LINE OUT.  All seems to be working (even had an RTTY contact today), but it the change has been that I have to drive the K3 harder than I did before.  Before, I used LINE OUT at around 45 and the SignaLink was at the 2 o'clock position.
>
> Is this what others are seeing with the newer models of the K3?  Mine was upgraded to current production level.  I have read most of the manual, but can't seem to find an menu where it lets you set any more gain for LINE IN.
>
> Lee - K0WA
>
>
>
> Ham Radio Operators:  Kansas QSO Party is August 28-29, 2010.  See www.ksqsoparty.org for details
>
> In our day and age it seems that Common Sense is in short supply.  If you don't have any Common Sense - get some Common Sense and use it.  If you can't find any Common Sense, ask for help from somebody who has some Common Sense.  Is Common Sense divine?
>
> Common Sense is the image of the Creator expressing revealed truth in my mind. -  J. Wolf
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>