[Elecraft] How to work KXV3

[The Smiths]

Can you now explain how you use the RX Antenna types... IE. When you push and hold the RX ant button...
 
> Date: Wed, 30 Jun 2010 03:40:52 -0700
> From: btippett at alum.mit.edu
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] How to work KXV3
> 
> 
> 
> lu1xs wrote:
> > 
> > I have a module installed (KXV3) my K3, please I need a help to better
> > understand the work of this module, when using an antenna to receive RX
> > ANT IN (KXV3) rear panel, and to transmit ANT 1, the change is done
> > automatically or I have to do manual with Knob Controls RX ANT to front
> > panel.-
> > 
> 
> Hola Luis,
> 
> To use an external RX antenna, connect it to RX ANT IN on the KX3V and then
> tap RX ANT on the front panel. K3 automatically switches from that antenna
> in receive to either ANT1 or ANT2 in transmit. If you later decide to
> transceive on ANT1 or ANT2, tap RX ANT on the front panel again so "RX ANT"
> on the display disappears.
> 
> 73, Bill
> 
> -- 
> View this message in context: http://elecraft.365791.n2.nabble.com/How-to-work-KXV3-tp5237048p5237493.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
 		 	   		  
_________________________________________________________________
The New Busy is not the old busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3