[Elecraft] Another (stupid) Clock Question

[Brett Howard]

When you're displaying Date or time or whatever (there are several other
things that can be shown in DISP mode).  Simply turn the VFO B knob to
change to the other values...

The K3 is VERY consistent in that if something is displayed in the top
line of text the VFO A knob adjusts it and if it is displayed in the
bottom line of text the VFO B knob adjusts that.

~Brett (N7MG)

On Mon, 2010-06-28 at 10:56 -0700, clayj at nwlink.com wrote:
> So - I had my new K3 out at our Field Day (W7S - Sammamish ARES/RACES
> Group) operation; and it worked great!   I'm still getting used to all the
> filters and features; but it was definitely a step above any other rig
> there, INCLUDING a Flex-3000.  The "HI RFI" mod definetly saved my rig on
> more than one occasion when someone started using a 40M dipole that was
> only 10' feet separated from the 15M dipole that I was using.
> 
> I did have one "interesting" issue - I let a number of folks use the rig,
> with no apparent ill effects; EXCEPT, the clock (when displayed in VFO B)
> is now displaying on the DATE and not the time.   I read through the
> owners manual, and CANNOT seem to figure out how to change that back.
> 
> Also - the manual implies that the "Display" button will "cycle" through
> several different displays in VFO B; but, the only two I can see are
> either the Frequency or Clock display.
> 
> Can someone assist?
> 
> Thanks!
> 
> Clay
> N7QNM
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html