[Elecraft] K3..Power Poles and my bad,very bad

[Jim Rhodes]

When I use PP's for any other voltage or reason the 12V power, I put the 
together in a different configuration. If the pair are at right angles 
to on another they won't go together with the standard formation.

Jim K0XU
On 6/28/2010 10:35 AM, Howard K2HK wrote:
> I had a very senior moment yesterday related to PowerPoles and could use some help. The power supply that my K3 is powered by has an auxiliary cigar lighter  outlet. In the midst of a project (too late at night)I plugged that cable into a similiar PowerPole which turned out to be the cable from another  P/S which happens to be a 24 VDC supply.The K3 went dead in a blink. Does not restart. First, any suggestion of where to start looking? Second, although this never happened to me before  it is something to be aware of if you have several terminals dangling at your desk. Embarrassing situation!
>
> Howard..K2HK
>
>
>
>
>
>
>   		 	   		
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>