[Elecraft] K3: Memory Recall

[Brett Howard]

Actually the K3 can do this!

You just have to setup the K3 to not do delayed memory updating.

Go into the CONFIG:MEM 0-9 menu entry and press the 1 button to select
M>V NOR.  Now when you're in the memory mode you can turn the VFO and
the memories will be gone to in real time.  M>V DLY is something I
prefer usually as you'll have all the relays clicking in the band pass
and low pass filters as you ratchet through your memories and what
not...  But its a lot more like Kenwood does things once you set it up
that way.

~Brett (N7MG)

On Mon, 2010-06-28 at 10:02 +0100, Tom Boucher wrote:
> Thanks Art, that was the problem. I had tried to set up memory hopping between bands, which unlike my TS850, the K3 won't do.
> 
> WB8ENE wrote:
> Sounds like you have a * in the first position of the name for that memory
> location.
> 
> 
> Knut AB2TC - you have to push the M>V button a second time if VFO A knob is used to select memory number, but not if you use the number keys.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html