[Elecraft] K2 & P3

[Don Wilhelm]

The P3 can indeed be used with the K2, but the K2 needs a buffer 
amplifier to isolate the IF output.
Take a look at Jack Smith's Z10000B buffer amp at 
http://www.cliftonlaboratories.com/current_products.htm.  He has a 
version especially for the K2.

If you transmitted into the XG1, it likely would have no ouptut (in 
which case the MAR must be replaced.  In your case, try a new battery first.

73,
Don W3FPR

John Chance-Read wrote:
> Can anyone help me with the following :-
> 1.  Can the new Elecraft Pan Adaptor be used with the K2 ?
> 2.  My Elecraft 7040 sig gen seems to have lost some output - 50uV o/p  only reads S5 on the K2 instead of S9 and indeed also on my Orion and no indication on my Oscilloscope which used to indicate 1/3 of a division on the extended range.
> I have probably put a little radiation into it !!.
> What component should I first test/replace.
> 73 G4BOU 
>
>
>       
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>