[Elecraft] Please Help - K2 Loss of SSB Transmit

[VK1OO]

Hi Jeff,

Thanks for this suggestion. I don't have another mike to try, but I've 
checked, and the PTT is working OK.

Mike
VK1OO



On 27/06/2010 6:42 PM, Jeff Cochrane - VK4BOF wrote:
> Mike,
> Have you tried another microphone?
> If the rig checks out ok with another microphone, check the PTT switch 
> in the MH2, mines a bit 'ordinary' and occasionally does not make 
> contact when the PTT button is pressed.
> Jeff Cochrane
> VK4BOF
> Innisfail QLD
> Australia
> Elecraft K3 #4257
>
>     ----- Original Message -----
>     *From:* VK1OO <mailto:mike.walkington at gmail.com>
>     *To:* Reflector Elecraft <mailto:elecraft at mailman.qth.net>
>     *Sent:* Sunday, June 27, 2010 6:28 PM
>     *Subject:* [Elecraft] Please Help - K2 Loss of SSB Transmit
>
>     Hi,
>
>     My K2 seems to have lost power out in SSB mode. As far as I can tell,
>     the RX is still working OK in all modes. The inbuilt ATU seems to
>     tune
>     OK and there is power out in CW. When I hold the MH2 PTT in, there
>     is no
>     "click", but the RX goes silent, the RF/ALC display stays blank in
>     both
>     RF and ALC modes ie there are no bars when I speak or whistle into
>     the mike.
>
>     Any suggestions would be appreciated.
>
>     Mike
>     VK1OO
>     K2: 2599
>     ______________________________________________________________
>     Elecraft mailing list
>     Home: http://mailman.qth.net/mailman/listinfo/elecraft
>     Help: http://mailman.qth.net/mmfaq.htm
>     Post: mailto:Elecraft at mailman.qth.net
>
>     This list hosted by: http://www.qsl.net
>     Please help support this email list: http://www.qsl.net/donate.html
>