[Elecraft] K3 Memory Recall

[Mike K2MK]

Hi Tom:

I troubleshoot peculiar K3 occurrences in this order.
1. Operator error
2. Computer error
3. K3 error

It sounds like item 1 is ok. Move to item 2. Turn off any logging program or
better yet disconnect the serial cable.

73,
Mike K2MK




Tom Boucher wrote:
> 
> Can anyone throw any light on the following way in which my K3 has always
> behaved? 
> 
> Using memories 00 - 09 as if they were band switches: Config: Mem 0-9 :
> Band Sel
> Memories 00 - 09 are each set up on a frequency in each band using the V>M
> button.
> Tap M>V button, then select a memory either by rotating VFO A or by
> tapping buttons 0 - 9, then tap M>V again.
> Band is selected correctly but VFO A is locked up and won't change
> frequency until another button is pushed (e.g. Freq Ent, Fine or Rate)
> 
> It's not a major problem but am I doing something wrong?
> 
> 73
> Tom G3OLB
> K3 S/N: 01434 with FW v. 3.97
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 

-- 
View this message in context: http://elecraft.365791.n2.nabble.com/K3-Memory-Recall-tp5225405p5225458.html
Sent from the Elecraft mailing list archive at Nabble.com.