[Elecraft] K3 Firmware updating

[Alan Bloom]

You might check on Ebay and see if you can pick up a couple of RS-232
switch boxes.  They were quite common years ago so you might find some
used ones.  That way you could bypass the microHAM whenever you want to
update firmware.

Al N1AL


On Tue, 2010-06-15 at 19:16 -0400, Larry - K2GN wrote:
> Is there a safe way to update a K3 through the microHAM router?
> 
> I don't like moving the cables for every update.
> 
> Something is going to wear out or break.
> 
> Difficult to do it with my 1 good hand .
> 
> Can I put a "Y" adaptor on the RS232 and run a USB to my laptop, and leave
> the microHAM powered off?
> 
> Laptop isn't connected to the radios at all.
> 
> I just need an easier way to stay up to date.
> 
> Same with using the K3 EZ and K3 Util programs.
> 
>  
> 
> Any ideas are  greatly appreciated.
> 
> de K2GN - Larry - http://k2gn.com <http://k2gn.com/> 
> 
> K3 S/N - 3278    P3 S/N - ????  (Ordered)
> 
>  
> 
> 
> 
> 
> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html