[Elecraft] Running the K3/10 at higher power

[elecraft at g4fre.com]

mine maxes out at 0.5mw on 500kHz, as claimed, on an HP power meter/head 
rated down to 100kHz 

Dave 

> 
> Message: 11
> Date: Mon, 14 Jun 2010 22:47:16 -0800
> From: Edward R Cole <kl7uw at acsalaska.net>
> Subject: [Elecraft] Running the K3/10 at higher power
> To: elecraft at mailman.qth.net
> Message-ID: <201006150647.o5F6lHsr011776 at huffman.acsalaska.net>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
> I also find that in TEST mode I am getting 0-1.5mw output on 500-KHz 
> vs. 0.5mw cited in literature for the K3.  I normally run between 
> 0.25 and 0.62mw to drive my 500-KHz linear (50-100w output), so do 
> not run at the higher levels, but found it interesting that it output 
> more than a mw. 
> 
> 
> 73, Ed - KL7UW, WD2XSH/45
> ======================================