[Elecraft] Power settings

[Guy Olinger K2AV]

Lot of trouble to keep from turning a knob.  Besides, there is more
needed to do a comparison with the linear out of line: make sure the
ATU is out of BYPASS mode, then hit ATU TUNE so that the power reading
at 100w is as little reactive as possible at the PA output.  Then make
your comparison.

73, Guy.

On Sun, Jun 13, 2010 at 5:36 AM, Oleg Zakhodyakin <ua4hej at mail.ru> wrote:
>
> According to some recent discussions about ALC settings, the best way, is to
> set power level for each band to feed Linear. But in some cases, we need to
> put "standart" 100Wt into antenna, say,for a quick comparison with a
> neighbor or just to check conditions with a distant station. Is it possible
> to configure K3 with one button click to change PWR SET from "per band"
> "locked" to 100wt unlocked? Or it could be "a future request"?
>
>  73's Oleg ua4hej
>  K3 #3731
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Power-settings-tp5173852p5173852.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>