[Elecraft] AUX_RF vs RX_IN

[Don Wilhelm]

Brett,

I am not certain I followed all your proposed solutions, but consult 
Figure 4 on page 43 of the K3 manual to see your possibilities.
The main can use either RX IN or the KAT3 selected antenna.
The sub can share the antenna with the main, or it can connect either to 
the AUX RF or to the KAT3 antenna that is NOT selected by the main RX 
(the latter selection depends on how you have the KRX3 antenna TMP cable 
plugged).

73,
Don W3FPR

Brett Howard wrote:
> I'm mulling something over in my head while writing some micro code on
> way too little sleep...  Anyway last year at FD I had some issues with
> my COR in the SubRX activating when we were doing diversity receive.
> Sometimes it was activating when we transmitted on our antenna and
> sometimes it was activating when the other station transmitted...  But
> it only was doing this on the subRX as soon as you got out of
> Diversity there were no issues.  Not sure why we only were having COR
> switching issues only on the sub as it seemed to follow the SubRX when
> the antennas were switched.
>
>