[Elecraft] Part across ant output on KPA100

[Glenn Biggerstaff]

Hi ,I am repairing a KPA100 that suffered some lightning damage .I have 
fixed most of it ,but have a question .The alignment and Installation 
(page 44 in the manual ) calls for >10 k  from the center pin of the ant 
connector (J2) and ground. I have that but only with a part that seems 
to be added from the center pin to ground removed .It is marked 5800 101 
and I think it is a inductor. It measures a couple of tens of an ohm dc 
and seems to be about 880 uh .Is it supposed to be there ?I don't see it 
on the schematic .
Glenn WW4B