[Elecraft] Would you be interested in a K2 PSK31 digital interface card?

[Joe Subich, W4TV]

 > The boards as designed by EA3BLQ did not provide a "line out" audio
 > signal,

That is not correct.  The EA3BLQ "Digital Interface" board (K2DI v. 3)
provides a buffered/amplified signal from J5 (demodulator output before
the volume control).  This is the definition of a "line out" signal.

While not quite the same as Tom's board (Don's design), the EA3BLQ
"K2DI" board is functionally identical on receive and provides for PTT
microphone switching/muting that is missing in Don's design.  The
K2DI board can be used on a stand alone basis if one does not need the
"digital mode VOX" (e.g. "tone switching") or transformer input/output
isolation provided in the K2DI-PCI daughter board.

73,

    ... Joe, W4TV


On 6/7/2010 1:01 PM, NQ3RP wrote:
>
> Guy -
>
> The boards as designed by EA3BLQ did not provide a "line out" audio signal,
> so using one of his boards would not provide the type audio you are seeking.
> While Tom's (N0SS) board does provide a fixed audio, it also requires that
> you make solder connections to the Control Board of your K2.  If you are
> comfortable with doing that, then I suggest you ask Tom for his files and
> have a couple of boards made.  Please contact Tom @ N0SS (at) arrl.net for
> any more discussion about your needs.  I'm trying to keep this discussion
> only about those that are interested in the K2DI&  PCI boards, thank you.