[Elecraft] K2/100 Has No Output on 80 or 40 When Hot

[Phil-W6TQG]

Hi Don,

Your ideas and information got me there. I checked K15 to make sure I
understood the relay table and it happened to be in the wrong position.

73,
Phil W6TQG


On Thu, Jun 3, 2010 at 11:24 PM, Don Wilhelm <w3fpr at embarqmail.com> wrote:

> Phil,
>
> Good sleuthing.  Given the information I had, I would not have suspected
> K15, but then what do I know!, you measurements are better than my ideas.
>
>
> 73,
> Don W3FPR
>
> Phil-W6TQG wrote:
>
>> Hi Don,
>>
>> Thank you for your help and information! K15 was the offender - when
>> hot, pins 3 to 4 and also 7 to 8 stay connected after changing the band
>> from 20m down to 40 or 80. This cuts off the path through K14 and K13 to
>> C71 and C72.
>>
>> 73,
>> Phil W6TQG
>>
>>
>>
>