[Elecraft] KDVR

[Jim McDonald]

Here's a posting from March on using the KDVR with N1MM.

I've used the macros in DXLab Commander successfully using the suggested
syntax.

Jim N7US



-----Original Message-----
From: N1MMLogger at yahoogroups.com [mailto:N1MMLogger at yahoogroups.com] On
Behalf Of Iain MacDonnell - N6ML
Sent: March 07, 2010 21:09
To: N1MMLogger at yahoogroups.com
Subject: Re: [N1MM] N1MM and K-3 Configuration for keying KDVR3 with F key
strings

I used CATA1ASC and CATA2ASC for a possible SO2R solution that I've never
really tested fully. CATA1ASC should have the same effect as CAT1ASC in a
SO1V-type scenario.

Some notes at http://www.dseven.org/ar/n1mm-kdvr3 

    ~Iain / N6ML



On Sun, Mar 7, 2010 at 11:28 AM, Steve London <n2ic at arrl.net> wrote:

>
>
> The correct command is CAT1ASC, not CATA1ASC .
>
> 73,
> Steve, N2IC
>
>
> Jim McCook wrote:
> > Last year N6ML came up with a great scheme for using 4 function keys on
> the keyboard with N1MM to key the K-3's KDVR3 on SSB. I used it afterward
in
> the CQWW SSB contest, and it worked flawlessly. Now, for some reason, it
> won't work in this ARRL SSB DX contest. The entry in N1MM for those keys
had
> been memorized in N1MM for SSB:
> >
> > *F1 CQ,{CATA1ASC K31;SWT21;}
> >
> > *F2 Exch,{CATA1ASC K31;SWT31;}
> >
> > *F3 Thanks!,{CATA1ASC K31;SWT35;}
> >
> > *F4 {MYCALL},{CATA1ASC K31;SWT39;}
> >
> >
> > I can't understand why they won't work now, when they did before. I can
> punch the M1-M4 buttons on the K-3 and they work fine. I've tried all the
> settings I can imagine in both N1MM and PTT-key in the K-3.
> >
> > If you are using this scheme, please tell me your magic combination of
> settings in N1MM and K-3 Config PTT-KEY
> >
> > Jim
> > W6YA
> >