[Elecraft] P3 Questions

[The Smiths]

If I'm not mistaken the p3 will only go down to a 2KHz display. That seems VERY wide an area to view for a cw guy who is trying to use the display to zero beat on a cw signal using the 50 hz filter width. 
That and the ability to adjust the notch filter just above or below the zero beat freq. 
Is there any talk about software to zoom in to  a smaller region like 100 or 200 Hz for example?  
The p3 can be used for more than just finding signals across an entire band. I see great uses for it as a convenient spectrum analyzer.  

Also, is there a reason that you can't toggle into full screen waterfall display?  I can see this being very helpful to the digital mode guys. 

> 



On Jul 31, 2010, at 2:33 PM, Lyle Johnson <kk7p at wavecable.com> wrote:

> 
>> ... Elecraft pictures of the P3 with the K3 shows it on the users right side of the radio.
> 
> You can place the P3 on either side, your preference.  The supplied 
> cables are long enough to accommodate either placement.
> 
>> ...Does the P3 have enough resolution on the more narrow bandwidth sweeps to discern separate signals
> 
> If the bandwidth is set narrow enough, you can easily see both peaks of 
> an RTTY signal.
> 
> 73,
> 
> L:yle KK7P
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>