[Elecraft] One more hint needed, 6 meter preamp

[Don Wilhelm]

Gil,

I assume you are using this preamp with the K3 equipped with the KXV3 or 
KXV3A.
Take a look at the rendering on page 3 of the PR-6 manual, and make it 
look just like that.
Whatever is currently connected to your RX ANT IN and OUT jacks is 
removed and the PR-6 connects to those jacks using BNC Male to Male 
connectors.  Then plug whatever you had on the RX ANT IN/OUT jacks onto 
the PR-6 bypass jacks.

73,
Don W3FPR

Gil WA5YKK wrote:
> Appealing to the experts;
>
>    With foggy head, I'm trying to get the idea of what coax connection 
> goes where on the 6 meter preamp module. I gather that the 6 meter 
> antenna is connected to J3, then obviously the BNC connections on the 
> other side go to the matching connectors on the K3, but the text is 
> fuzzy after that  - I don't register what goes to J1.
>    Could those whom have mastered this one item give me a hint? (The 
> Elecraft text has too many speed bumps in it that lead me nowhere, for 
> some reason!)
>
> Thanks, 73's
> Gil WA5YKK
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>