[Elecraft] [K3] DC Power cable

[Paul Kirley]

When assembling APP connectors, I prefer to jam a wooden toothpick 
tightly into the hole and cut off both ends.  No risk of a short.

73, Paul W8TM


Don W3FPR sed:
If you mean that the red and black housings come apart, put a drop of 
superglue on the mating surfaces and they should be tight.  There is a 
hole intended for a roll-pin, but often the roll pin comes out and gets 
into places no metal should be, so if you do use a roll-pin, secure it 
with a bit of superglue.