[Elecraft] [K3] DC Power cable

[Phil Kane]

On 7/25/2010 10:28 AM, Don Wilhelm wrote:

> If you mean that the red and black housings come apart, put a
> drop of superglue on the mating surfaces and they should be
> tight.  There is a hole intended for a roll-pin, but often the
> roll pin comes out and gets into places no metal should be, so if
> you do use a roll-pin, secure it with a bit of superglue.

  I have found that using the smallest size cable tie
  a.k.a."Ty-Rap" (tm) through the holes serves to keep the
  connectors together and the bodies from separating.  Easy
  enough to separate if needed.

--  73 de K2ASP - Phil Kane
    Elecraft K2/100   s/n 5402