[Elecraft] MH2 Mic arrived DUH!

[Don Wilhelm]

Neil,

The resistance is not critical, so if you have a resistor (of any 
tolerance) between 4.7k and 6.8k on hand use that.

Did you have a tan envelope on the package with the 8 jumpers for the 
microphone configuration header?  If so, look very carefully in that 
envelope, the resistor can get twisted inside and will not fall out - 
tear the envelope open if necessary.

73,
Don W3FPR

Neil Shubert wrote:
> Hi ALL
>
> I got my MH2 mic or the k2 and there was no resistor in the box  ACK!
>
> I know its a 5.6K  Green Blue red, and its a 1/4 watt but is there a better
> choice?
>
> and should I get a gold or a silver tolerance?
>
> Off to the telephone shack tomorrow
>
> -Neil
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>