[Elecraft] Line out audio

[Joe Subich, W4TV]

 > Same problem i have with the main receiver audio.  It's does not
 > react per the setting of the Config: line out adjustment.  Only the
 > Sub rx does.  Again, is this the way it is supposed to work?

No, when CONFIG: LIN OUT is set to NOR, the line out audio is fixed,
"pre fader" level for both main and sub receivers if dual rx or
diversity is selected.  If only the main receiver is selected
(enabled) the right Line Out channel is quiet (other than some
minor crosstalk).

When both receivers are enabled with a 50 uV signal feeding both
receivers, the level of left (main) and right  (sub) track each
other and the CONFIG: LIN OUT level.

73,

    ... Joe, W4TV

On 7/21/2010 3:21 PM, Larry Godek wrote:
> Aha!  Another fellow who experiences the same thing i do:
>
> I quote: "Unfortunately, when I have to adjust audio level with the
> radio's volume pot(s), all the other levels downstream also change
> (line out is controlled by the volume pot)
>
> It certainly would be nice to have a FIXED level out of that line out
> jack and be able to adjust levels on the headset mixer to the
> individual outputs without having the rig volume pot interfere.
>
> -lu-W4LT- #3192"
>
>
> Same problem i have with the main receiver audio.  It's does not
> react per the setting of the Config: line out adjustment.  Only the
> Sub rx does.  Again, is this the way it is supposed to work?  I'm the
> 3rd person with the same observation.  I've seen no "yes that's
> right" or "No, it is not right" response from anywhere.  Only things
> to try and nothing makes any difference.  This is my 3rd or 4th
> posting concerning this.
>
> Course in some ways that's ok because i can operate the rig using the
> A vfo and leave the Sub set on a WSPR channel.  Only thing is that
> changes when i have to operate a "split" to work DX who requests it.
> Not a major event but if the audio out of the main rx is supposed to
> be controlled by the Config: line out control, then why does it not
> do so?  I do have stereo cords (TRS) that i use and they do test
> correctly.  I use a REALTEK audio card and have tried both the Line
> in and Mic jacks, again with no difference.  I have upgraded the
> software in the radio several times from what it arrived here with
> and that does not seem to have been an issue.
>
> I use headphones most all the time that are plugged into the back of
> the computer soundcard and i hear both the main and sub audio when
> the sub is turned on.  Otherwise i hear strictly Main rx audio in
> both ears.
>
> Am i not understanding something or do i have ghosts playing games
> with me?
>
> Larry W0OGH
>
>
> Larry W0OGH
>
>
> ______________________________________________________________
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post:
> mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this
> email list: http://www.qsl.net/donate.html
>